Appliance Repair West Palm Beach: When Your Appliances Break Down?
When any of your home or kitchen appliances in West Palm Beach, FL break down? There are a few things you should do before attempting to see if you can fix it yourself or in some cases before you even call a local appliance repair company. The absolute first thing you should do is check to see if it is covered under any warranty either by the manufacturer or from the household appliance store that you bought it from. First, this can save you money if it is covered under warranty, however, if you attempt to fix it yourself while the warranty is still valid, then you could void the warranty.
Refrigerator Repair Tips
If you want to fix your broken appliance yourself, here are some appliance repair tips from Appliance Repair West Palm Beach.
When it comes to refrigerator repair service, it is important that you act in a quick manner as delaying to fix these problems can turn a refrigerator repair small problem into a big problem.
- Fluctuating temperatures: This is when your fridge is either too cold or too warm and sometimes it is freezing your food item. What you should do in this case is to check the control dial that regulates the internal temperature of your unit. If making adjustments to the dial do not fix the problem, then our next step will be to take a look at the coils of the condenser. It is not uncommon for these coils to get covered in dust and other debris, which could cause it not to cool properly. So clean the coils off and see if you notice a difference, if not the next step would be to make adjustments to the internal thermostat, you may need help from a refrigerator service technician.
- Leaks: If your refrigerator is leaking you need to act fast so that you can minimize the damage to the floor and other items in your home. The first thing to check for this problem is your condensing defrost tray which is located under the refrigerator. This tray could be causing the leak if it is not evenly level or damaged. If the leak is on the inside of the fridge, then you should check the humidity control, another thing you could check is the water lines that go to the ice and water dispenser.
- Loud Noises: If you notice any loud noises that are out of the standard such as banging sounds or knocking, then you have a problem. First, try and identify where the sound is coming from. If the noise seems to be coming from the back of the unit, it could be a loose fan or compressor. If the strange sound is from the front or underneath you could try loosening the screws for the defrost tray.
- No Power: If your refrigerator is not running, then it could be a power problem. Check to make sure the unit is plugged in correctly and if that doesn’t work, try and plug another device into the same outlet to see if the outlet is the problem. If all those check out ok, then see if the light inside the fridge comes open when you open the door, if it doesn’t try replacing the bulb, if you put a new bulb in and it still doesn’t work, then the fridge is not receiving power which could indicate that there is a power cord problem. Contacting a refrigerator repairman will also help.
Fast Same Day Service, Warranty On Both Parts And Labor From Appliance Repair West Palm Beach https://t.co/bp9N9wpXTa
— Jason Sanchez (@westpalmrepair) November 5, 2015
Microwave Repair Problems
With age, every electrical appliance starts creating trouble. While some of them are daunting enough to call for a licensed service technician from an appliance repair company in Florida, the others can be handled by the home owners themselves. The electrical errors that can easily be sorted out without the requirement of an oven repairman are mentioned below.
- If you encountered a broken door handle of the microwave, then do not panic and maintain your patience throughout. With the help of a putty knife, take out the trim, which is fixed to the door. Below this trim, you find the screws to detach the handle from the door.
- If the microwave is not working due to a fire in the apparatus, then look for the oven’s thermostat safety switch. Nowadays, most of the microwaves have this feature. It is used to turn the microwave off when something inside the microwave catches fire.
- Replacing the bulb of your residential microwave oven is also relatively straightforward. The only thing to remember is to switch off the power supply to the microwave before commencing the replacement work. If the power supply is not turned off, you may very well damage the smart board circuits of the microwave.
- If arcing occurs during the running of the microwave, then switch off the power supply to the microwave first. Now, clean the area in and around the wave guard. Such deposition of food is often responsible for the arcing in the microwave.
- If the countdown timer on the display is running and the light inside the microwave is also working, but it is not producing the heating effect, then this could be accredited to a faulty door switch.
Dishwasher Repair Problem
- Replacing the water inlet valve, so when you notice that the dishwasher in your house is not cleaning at all or not cleaning as well as it normally does then you may have a problem with the water flow. Which could mean that the tub is not filling, it’s over-filling or also under-filling? More times than others this is caused by either a restricted or faulty water inlet valve.
- The first thing you should check on your washer at home, for this type of appliance problem is the Float. If your particular dishwasher model has one, the reason is if the float is stuck in the upright position or if it doesn’t freely move. This could mean that there is something under the float, such as a fork or spoon that is causing the tub not to fill to the right level. If you do not have a float or if the float looks ok, then you should proceed to check the water inlet valve, you will need a digital multimeter to properly do the test. It is always good news for consumers when they find out that certain appliance repair jobs are easy enough to do it themselves, especially if you are on a budget or if you just like to fix things yourself.
What to do with a Manufacturer’s Warranty?
If you have a manufacturer’s warranty in place, you will need to contact the brand of appliance you bought and spoke to their service department, they will set up the service call for you, along with giving you some advice for what to do in the meantime, before the appliance service technician comes out to fix the problem.
Here is a list of steps that you can take whenever you face an appliance repair problem.
- Contact the company that issued the warranty, if you have your receipts from the day of purchase, these will help you out a lot when you call the service department.
- If you have a warranty read through the guidelines to make sure you have the necessary documentation to file a claim.
- Find out from the company if you need to contact a repair company or if they will take care of everything for you. If they want you to, ask them if there are any approved vendors that they can recommend.
- If you have to pay for the repair costs up front, make sure you keep all the invoices for parts and labor, as you will need these to submit to them to get reimbursed.
Palm Beach County will give you a lot of options for appliance repair companies. The only thing you need to decide on is if the call for a service technician is necessary or not. Be an informed consumer. Try the repair tips mentioned above, if it still doesn’t work, you can give us a call for a repair service anytime.